Cosplay Tutorials
Below you'll find all of our cosplay tutorials written by both the Dangerous Ladies and other crafters in the community.
Let's create a wealthy, useful knowledge base for prop making and support for cosplayers! We are always open to comments and suggestions! If you'd like to submit a tutorial, or request one, contact us.
Tutorials
-
Attaching Resin and 3D Prints to Cosplays
Learn how to attach resin and 3D printed pieces to your cosplays using Dangerous Ladies Cosplay Kits!
-
Planning Pleats Cosplay Tutorial
Pleated skirts are iconic in cosplay (we're all familiar with sailor fukus), so odds are at some point you're going to encounter something that needs a pleat. This tutorial provides an...
-
Finishing 3D Prints 101: Joining Pieces Guide
This tutorial will teach you to join 3D Printed pieces together seamlessly, the easy way!
-
Finishing 3D Prints 101: Basic Supplies for Bodyshopping
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
-
Finishing TPU Prints and Prepping TPU Kits for Painting
If you've just purchased your first TPU Printed Cosplay Kit and don't know where to start, this tutorial will help you get familiarized and comfortable working with it.
-
Lightweight Filament Printing Tutorial
This tutorial was written by and submitted to us by: LoratailCosplay, who also provided all images and calibration files included. Article was edited and refined by StarsofCassiopeia If you want...
-
Link's Tears of the Kingdom Arm Cosplay Tutorial - How to Glue Silicone
A cosplay tutorial for how to make Link's Zonai Arm as featured in Tears of the Kingdom! This tutorial teaches you how to glue silicone to fabric in order to...
-
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
-
Finishing 3D Prints 101: 3D Print Sanding Guide
Do you sand your 3D prints? Do you want to but it takes too long? Do you want to do it more efficiently? Let's learn how!
-
What to do if your dowel or key doesn't fit in your 3D Print
Your dowel or key not fitting into your 3D Print is more common than you think, but fixing it doesn't have to be daunting. These tips are also useful if...
