![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Angled Sanding Tools [3D Print Files] cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/angled-sanding-tools-3d-print-files-176193.png?v=1707155109)
![Angled Sanding Tools [3D Print Files] cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/angled-sanding-tools-3d-print-files-756907.png?v=1707155109)
Dangerous Ladies' 3D models for basic sanding wedges.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer.
These are tools to to help you with sanding. They come in seven different angles -- 30, 45, 60, 90, 120, 135, 150. You wrap them in sandpaper and use them to sand nooks and crannies inside inner elements of prints, allowing you to reach easier without having to fit your fingers in. Of course, commercial sanding needles work for this too, but they're generally quite narrow, and don't take care of broad surfaces very well. Also, the different angles mean you can match corners and joints, letting you sand both sides at once, or get really close without bumping into the other side.
If you'd like your sandpaper to be more secure, you can glue it to the stick with hot glue instead of just holding it or taping it. You can usually peel it off the stick again after. Hairspray works as well if you want to wash it off, but it tends to come loose if you're wet sanding. Water wahsable, and all!
I suggest printing them laying down flat so the print lines run the long way; they'll be stronger that way.
They're about 0.5" wide by default, but you can scale them to any size if you want a broader sanding surface.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer.
These are tools to to help you with sanding. They come in seven different angles -- 30, 45, 60, 90, 120, 135, 150. You wrap them in sandpaper and use them to sand nooks and crannies inside inner elements of prints, allowing you to reach easier without having to fit your fingers in. Of course, commercial sanding needles work for this too, but they're generally quite narrow, and don't take care of broad surfaces very well. Also, the different angles mean you can match corners and joints, letting you sand both sides at once, or get really close without bumping into the other side.
If you'd like your sandpaper to be more secure, you can glue it to the stick with hot glue instead of just holding it or taping it. You can usually peel it off the stick again after. Hairspray works as well if you want to wash it off, but it tends to come loose if you're wet sanding. Water wahsable, and all!
I suggest printing them laying down flat so the print lines run the long way; they'll be stronger that way.
They're about 0.5" wide by default, but you can scale them to any size if you want a broader sanding surface.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Angled Sanding Tools [3D Print Files]
SKU: 1424
Instant Download
Email Delivery
Dangerous Ladies' 3D models for basic sanding wedges.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer.
These are tools to to help you with sanding. They come in seven different angles -- 30, 45, 60, 90, 120, 135, 150. You wrap them in sandpaper and use them to sand nooks and crannies inside inner elements of prints, allowing you to reach easier without having to fit your fingers in. Of course, commercial sanding needles work for this too, but they're generally quite narrow, and don't take care of broad surfaces very well. Also, the different angles mean you can match corners and joints, letting you sand both sides at once, or get really close without bumping into the other side.
If you'd like your sandpaper to be more secure, you can glue it to the stick with hot glue instead of just holding it or taping it. You can usually peel it off the stick again after. Hairspray works as well if you want to wash it off, but it tends to come loose if you're wet sanding. Water wahsable, and all!
I suggest printing them laying down flat so the print lines run the long way; they'll be stronger that way.
They're about 0.5" wide by default, but you can scale them to any size if you want a broader sanding surface.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on any printer.
These are tools to to help you with sanding. They come in seven different angles -- 30, 45, 60, 90, 120, 135, 150. You wrap them in sandpaper and use them to sand nooks and crannies inside inner elements of prints, allowing you to reach easier without having to fit your fingers in. Of course, commercial sanding needles work for this too, but they're generally quite narrow, and don't take care of broad surfaces very well. Also, the different angles mean you can match corners and joints, letting you sand both sides at once, or get really close without bumping into the other side.
If you'd like your sandpaper to be more secure, you can glue it to the stick with hot glue instead of just holding it or taping it. You can usually peel it off the stick again after. Hairspray works as well if you want to wash it off, but it tends to come loose if you're wet sanding. Water wahsable, and all!
I suggest printing them laying down flat so the print lines run the long way; they'll be stronger that way.
They're about 0.5" wide by default, but you can scale them to any size if you want a broader sanding surface.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...