Dangerous Ladies' 3D models for Yuffie's Armor
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 200mm printer.
Includes a shoulder pauldron, finger plug, thigh band, upper arm band and bracer plate.
The shoulder pauldron and bracer both have 10mm slots on the inside for the installation of a chicago screw for rigging.
By default, the following pieces have the following measurements, and can be scaled up and down to fit your size:
Thigh band = 20"
Upper arm band = 11"
Bracer plate = 10" (at top)
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 200mm printer.
Includes a shoulder pauldron, finger plug, thigh band, upper arm band and bracer plate.
The shoulder pauldron and bracer both have 10mm slots on the inside for the installation of a chicago screw for rigging.
By default, the following pieces have the following measurements, and can be scaled up and down to fit your size:
Thigh band = 20"
Upper arm band = 11"
Bracer plate = 10" (at top)
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Dangerous Ladies' 3D models for Yuffie's Armor
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 200mm printer.
Includes a shoulder pauldron, finger plug, thigh band, upper arm band and bracer plate.
The shoulder pauldron and bracer both have 10mm slots on the inside for the installation of a chicago screw for rigging.
By default, the following pieces have the following measurements, and can be scaled up and down to fit your size:
Thigh band = 20"
Upper arm band = 11"
Bracer plate = 10" (at top)
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Fits onto a 200mm printer.
Includes a shoulder pauldron, finger plug, thigh band, upper arm band and bracer plate.
The shoulder pauldron and bracer both have 10mm slots on the inside for the installation of a chicago screw for rigging.
By default, the following pieces have the following measurements, and can be scaled up and down to fit your size:
Thigh band = 20"
Upper arm band = 11"
Bracer plate = 10" (at top)
The finger plug includes a base. The base can be installed into your padded arm piece; the fabric can be glued overtop the base with an elastic around the outer ring to ensure it glues in tightly. You can then pop the plug in overtop for a clean finish.
Files include:
- Photos
- .STL files
We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...