Subscribe to our newsletter for 10% OFF!

Your cart

Your cart is empty

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for Vash's arm and hand.
Models by Jennifer Rezny (@quicksparrows)

.stl format. Fits printers 210mm or taller, but there are some cuts for taller printers, and most pieces are quite small, especially on the hands.

If you'd like to purchase the hand on its own, please click here!

This is an intermediate file, but I have made a couple different variations with the idea of simplifying it as much as possible. As is the nature with arm armour, it is impossible to make anything that is truly one-size-fits-all, but I hope the different versions and the notes here will make it easier to understand how you can scale the files to fit you, even if you are a beginner.

By default, the arm is made for someone with a distance between the wrist and the armpit of 18".

EASY 11in
This version is sized for a 12" bicep, 11" elbow and 7" wrist. It is the most accurate to scale version; it is quite bulky on the upper end to match the character design, and as such, it might dig into your side a little bit, but it is "correct." (Or as correct as you can get translating an animated character to a physical item a real person can wear.) If you are married to accuracy, I suggest using this version to scale to your size. The second bone slots in with a 3/4" magnet.

EASY 14in
This version is sized for a 14" bicep, 14" elbow and 8" wrist. This arm is actually identical in size to the EASY 11in, but the hole inside is larger; this means that if you scale it, it will be smaller in profile, and less bulky looking. If you want a nice balance between comfort and accuracy, this is the version to use. There are also separated bones in this version so you can move them as desired.

OPEN
This version is as open as I could make it, which is 14.75". This is for freewheelers. The lower arm pieces are all separate so you can move the bones as you please. Do as you will.

UNCUT
A version with no inner holes. Use this if you are familiar enough with Blender or another 3D modelling software to punch your own holes in.

LED Holes
Alternate versions with detail slots punched out so LEDS can be installed.


HOW TO SCALE
How to scale for circumference: Take the number you are looking to get (ie a 15" circumference) and divide it by 11 or 14, depending on the version. This number will get you the percentage to print at. Ie, 15 divided by 14 is 1.07, so you should print it at 107%. Or, if you have a 12" arm, that's 12 divided by 14 = 0.85 = 85%. Remember to only do this on the width and depth, NOT the height; that should be calculated separately.

To scale for height: measure your arm from armpit to wrist. Divide that number by 18. Ie, if your arm is 14" long, that's 14 divided by 18 = 0.77 = 77%. This is how you should scale it vertically.

NOTES ON ELBOWS
You'll notice that the default part that covers your elbow, "Lower Bicep", is a tube. This means your arm is locked into a straight line like you are wearing a Pringles can. This is unideal, even if it's accurate, because no one wants to live like that. Therefore you have a few options:

  • The "Swing" elbow –– this elbow has a curved cutout on the bottom that will allow it to curl against the lower arm part. Movement may not be great, but there is some.
  • The "Double Swing" elbow –– this elbow has TWO curved cutouts, on the top and bottom, and may move a little better. This may require you to wear it a little lower, which shifts the whole arm down, but it's a bit wider.
  • Half-cut versions of the swing elbows; these are in two halves with slots for 1/4" magnets, so you can take this elbow on and off without moving the rest of the arm. This could be handy while in cosplay, especially if you want to take it off to eat or do other activities involving elbow movement without removing the entire arm. I personally would recommend the Swing elbow in halves as the best option, but you may want to experiment and find what you prefer.
  •  You may want to just skip the elbow entirely, or only wear it for photoshoots.


THE HANDS
The hand is largely modular pieces. The small palms and side-hand pieces are in one size, so you'll have to experiment with sizing. The fingers are all available in almost every ring size from 3 to 13; I've omitted some of the bigger tips for simplicity, but this should cover just about anyone. I suggest measuring every segment of your fingers and test print the relevant sizes and decide whether you need to tweak from there.

The bracelet is sized for a 7 wrist and can be scaled the same as above, just using the number 7. It is slightly shallower than it is wide so it should fit most wrists quite nicely. There are slots for 1/8" magnets but this can change.

HELP, I NEED HELP
If you need help, please contact us.

CAN YOU SCALE THIS FOR ME?
Yes! There is a $30usd fee for resizing the files; please select 'custom size' when checking out. We will be in touch with a list of measurements we require, so please order from an email address that you check regularly!

Files include:

  • Photos
  • .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Vash the Stampede's Arm and Hand [3D Print Files]

SKU: 1059
Regular price $30.00
Unit price
per 
Instant Download
Email Delivery

.stl file

Shipped and Made Consciously. Read More

Need help? Contact us

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Abigail Burnham

The people are nice, but the website doesn't tell me when my Vash arm is coming in

Hello!

You ordered a digital file, you will not be receiving a physical vash arm kit as you’ve already received printable .stl files via email for you to print at home.

If you would like to order a physical kit to be shipped to you, please order here: https://dangerousladies.ca/products/vashs-arm-and-hand-3d-printed-kit

Thank you,
Julia

Dangerous Ladies' 3D models for Vash's arm and hand.
Models by Jennifer Rezny (@quicksparrows)

.stl format. Fits printers 210mm or taller, but there are some cuts for taller printers, and most pieces are quite small, especially on the hands.

If you'd like to purchase the hand on its own, please click here!

This is an intermediate file, but I have made a couple different variations with the idea of simplifying it as much as possible. As is the nature with arm armour, it is impossible to make anything that is truly one-size-fits-all, but I hope the different versions and the notes here will make it easier to understand how you can scale the files to fit you, even if you are a beginner.

By default, the arm is made for someone with a distance between the wrist and the armpit of 18".

EASY 11in
This version is sized for a 12" bicep, 11" elbow and 7" wrist. It is the most accurate to scale version; it is quite bulky on the upper end to match the character design, and as such, it might dig into your side a little bit, but it is "correct." (Or as correct as you can get translating an animated character to a physical item a real person can wear.) If you are married to accuracy, I suggest using this version to scale to your size. The second bone slots in with a 3/4" magnet.

EASY 14in
This version is sized for a 14" bicep, 14" elbow and 8" wrist. This arm is actually identical in size to the EASY 11in, but the hole inside is larger; this means that if you scale it, it will be smaller in profile, and less bulky looking. If you want a nice balance between comfort and accuracy, this is the version to use. There are also separated bones in this version so you can move them as desired.

OPEN
This version is as open as I could make it, which is 14.75". This is for freewheelers. The lower arm pieces are all separate so you can move the bones as you please. Do as you will.

UNCUT
A version with no inner holes. Use this if you are familiar enough with Blender or another 3D modelling software to punch your own holes in.

LED Holes
Alternate versions with detail slots punched out so LEDS can be installed.


HOW TO SCALE
How to scale for circumference: Take the number you are looking to get (ie a 15" circumference) and divide it by 11 or 14, depending on the version. This number will get you the percentage to print at. Ie, 15 divided by 14 is 1.07, so you should print it at 107%. Or, if you have a 12" arm, that's 12 divided by 14 = 0.85 = 85%. Remember to only do this on the width and depth, NOT the height; that should be calculated separately.

To scale for height: measure your arm from armpit to wrist. Divide that number by 18. Ie, if your arm is 14" long, that's 14 divided by 18 = 0.77 = 77%. This is how you should scale it vertically.

NOTES ON ELBOWS
You'll notice that the default part that covers your elbow, "Lower Bicep", is a tube. This means your arm is locked into a straight line like you are wearing a Pringles can. This is unideal, even if it's accurate, because no one wants to live like that. Therefore you have a few options:

  • The "Swing" elbow –– this elbow has a curved cutout on the bottom that will allow it to curl against the lower arm part. Movement may not be great, but there is some.
  • The "Double Swing" elbow –– this elbow has TWO curved cutouts, on the top and bottom, and may move a little better. This may require you to wear it a little lower, which shifts the whole arm down, but it's a bit wider.
  • Half-cut versions of the swing elbows; these are in two halves with slots for 1/4" magnets, so you can take this elbow on and off without moving the rest of the arm. This could be handy while in cosplay, especially if you want to take it off to eat or do other activities involving elbow movement without removing the entire arm. I personally would recommend the Swing elbow in halves as the best option, but you may want to experiment and find what you prefer.
  •  You may want to just skip the elbow entirely, or only wear it for photoshoots.


THE HANDS
The hand is largely modular pieces. The small palms and side-hand pieces are in one size, so you'll have to experiment with sizing. The fingers are all available in almost every ring size from 3 to 13; I've omitted some of the bigger tips for simplicity, but this should cover just about anyone. I suggest measuring every segment of your fingers and test print the relevant sizes and decide whether you need to tweak from there.

The bracelet is sized for a 7 wrist and can be scaled the same as above, just using the number 7. It is slightly shallower than it is wide so it should fit most wrists quite nicely. There are slots for 1/8" magnets but this can change.

HELP, I NEED HELP
If you need help, please contact us.

CAN YOU SCALE THIS FOR ME?
Yes! There is a $30usd fee for resizing the files; please select 'custom size' when checking out. We will be in touch with a list of measurements we require, so please order from an email address that you check regularly!

Files include:

  • Photos
  • .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

DANGEROUSLADIES.CA
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more