Dangerous Ladies' 3D models for Vamp Fatale's accessories.
Model by Aubree Ciupa (@aelynn000) and Jennifer Rezny (@quicksparrows)
.stl format. Little bits, mostly flat backed, arms and headwings!
The headband for the wings has two magnet slots (each), so if you choose to use them, you'll need 8 magnets, 5mm diameter.
The armbands have an inner diameter of 12", but there's both a version with a support ring and a version without. The version without has a bit more wiggle room by default and sits more flush to the arm, but may be trickier to get them to stay up.
A lot of the leg pieces may need to be heat curved. Slowly heat the piece up with a hair dryer in an even fashion and then gently curve as desired. Hold in place until cooled, or dip into cool water.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
Dangerous Ladies' 3D models for Vamp Fatale's accessories.
Model by Aubree Ciupa (@aelynn000) and Jennifer Rezny (@quicksparrows)
.stl format. Little bits, mostly flat backed, arms and headwings!
The headband for the wings has two magnet slots (each), so if you choose to use them, you'll need 8 magnets, 5mm diameter.
The armbands have an inner diameter of 12", but there's both a version with a support ring and a version without. The version without has a bit more wiggle room by default and sits more flush to the arm, but may be trickier to get them to stay up.
A lot of the leg pieces may need to be heat curved. Slowly heat the piece up with a hair dryer in an even fashion and then gently curve as desired. Hold in place until cooled, or dip into cool water.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
Finishing 3D Prints 101: Basic Supplies for Bodyshopping
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
