Dangerous Ladies' 3D models for the last vampire hunter's Morningstar.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Sliced for a printer 250mm tall; the model prints with no seams. Main mace finishes at about 19" with a 8" handle. Chain not included. Mace assembles on a 18" rod, 1/4" diameter; I suggest aluminum just for a bit of weight and strength, but a dowel or steel will do nicely too.

The Morningstar is a bit of a tricky print, but if you stand it upright on its bottom and set supports to 30 degrees, it should balance quite nicely. Slow your printer down to 40mm/sec for best results. There are also two versions of it, 4 prong and 6 prong; both are canon at one point or another, with the 4 prong being more common but the 6 prong being more durable and matching the handle better.

Files include:
- Photos
- .STL files

We printed ours at 0.1 layers and with 1.6-2.0 mm walls for strength; if you plan to swing it around like Trevor does, I suggest doing really thick walls and a high infill for durability. If it's just for display or to hang off your belt, you can go easier on that!

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file