Dangerous Ladies' 3D models for Childe's Foul Legacy Twin Blade (Genshin Impact).
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 200x200x300mm printers. It is approximately 85" finished, but you can lengthen/shorten the handle by cutting the PVC Pipe shorter (min. 20".)
Hardware required for build:
- 3/4" PVC Pipe x2
- 1/4" Dowel (6.35x152mm) x6
- 1/8" Dowel Pin (3x50mm) x4
- 8mm Down Chunk (8x40mm) x4
Only half required for one spear head.
Files include:
- Assembly Guide
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 200x200x300mm printers. It is approximately 85" finished, but you can lengthen/shorten the handle by cutting the PVC Pipe shorter (min. 20".)
Hardware required for build:
- 3/4" PVC Pipe x2
- 1/4" Dowel (6.35x152mm) x6
- 1/8" Dowel Pin (3x50mm) x4
- 8mm Down Chunk (8x40mm) x4
Only half required for one spear head.
Files include:
- Assembly Guide
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for Childe's Foul Legacy Twin Blade (Genshin Impact).
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 200x200x300mm printers. It is approximately 85" finished, but you can lengthen/shorten the handle by cutting the PVC Pipe shorter (min. 20".)
Hardware required for build:
- 3/4" PVC Pipe x2
- 1/4" Dowel (6.35x152mm) x6
- 1/8" Dowel Pin (3x50mm) x4
- 8mm Down Chunk (8x40mm) x4
Only half required for one spear head.
Files include:
- Assembly Guide
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 200x200x300mm printers. It is approximately 85" finished, but you can lengthen/shorten the handle by cutting the PVC Pipe shorter (min. 20".)
Hardware required for build:
- 3/4" PVC Pipe x2
- 1/4" Dowel (6.35x152mm) x6
- 1/8" Dowel Pin (3x50mm) x4
- 8mm Down Chunk (8x40mm) x4
Only half required for one spear head.
Files include:
- Assembly Guide
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...