Subscribe to our newsletter for 10% OFF!

Your cart

Your cart is empty

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for Shinjiro's Reload Axe.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 72".

It's designed so the blades can pop off the handle on two 1" magnets each (8 magnets total!) You can also just glue them in place. The spike can pop off on a 1/2" magnet too (2 total). The head can also slot off the pipe. This is handy for travel and storage, as it can pack down small.

Assembles on a 1.25" wooden dowel for the handle, cut 60" long. If you want to use a PVC pipe, you can print at 106% scale to use a 1" PVC pipe (OD 34mm.)

If you want to wrap the handle in carbon fibre vinyl or similar, then scale up by 1% as well to make extra space.


Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Sale

Shinjiro's Reload Axe [3D Print Files]

SKU: 1719
Regular price $17.00 $14.45 15% off
Unit price
per 
Instant Download
Email Delivery

Shipped and Made Consciously. Read More

Need help? Contact us

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Dangerous Ladies' 3D models for Shinjiro's Reload Axe.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 250mm tall bed, but I've included whole versions for people who would like to recut on their own. Finishes at 72".

It's designed so the blades can pop off the handle on two 1" magnets each (8 magnets total!) You can also just glue them in place. The spike can pop off on a 1/2" magnet too (2 total). The head can also slot off the pipe. This is handy for travel and storage, as it can pack down small.

Assembles on a 1.25" wooden dowel for the handle, cut 60" long. If you want to use a PVC pipe, you can print at 106% scale to use a 1" PVC pipe (OD 34mm.)

If you want to wrap the handle in carbon fibre vinyl or similar, then scale up by 1% as well to make extra space.


Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more