Subscribe to our newsletter for 10% OFF!

Your cart

Your cart is empty

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for She-Ra's S5 tiara.
Model by Jennifer Rezny (@quicksparrows)

.stl format. The tiara prints separately from the wings so you can adjust the wings' position based on your own ears. We suggest test printing everything with junk settings to check that fit works good for you! The space between the ears by default is roughly 165mm.

The wings print in one piece on a 275mm tall bed, or in two pieces on a shorter bed. (We recommend 200x200x200 roughly, but it'll fit on a bunch of different configurations.)

There is also a second versions of the wing with only two feathers; this is because a) sometimes in the show they've coloured that part to match her hair rather than being a part of the tiara and b) if you find it's tricky or uncomfortable to fit the wings around your ear, this version is a little less restrictive!

Files include:
- Photos
- .STL files

We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials:
digital file

She-Ra's S5 Tiara [3D Print Files]

SKU: 210
Regular price $5.00
Unit price
per 
Instant Download
Email Delivery

Shipped and Made Consciously. Read More

Need help? Contact us

Dangerous Ladies' 3D models for She-Ra's S5 tiara.
Model by Jennifer Rezny (@quicksparrows)

.stl format. The tiara prints separately from the wings so you can adjust the wings' position based on your own ears. We suggest test printing everything with junk settings to check that fit works good for you! The space between the ears by default is roughly 165mm.

The wings print in one piece on a 275mm tall bed, or in two pieces on a shorter bed. (We recommend 200x200x200 roughly, but it'll fit on a bunch of different configurations.)

There is also a second versions of the wing with only two feathers; this is because a) sometimes in the show they've coloured that part to match her hair rather than being a part of the tiara and b) if you find it's tricky or uncomfortable to fit the wings around your ear, this version is a little less restrictive!

Files include:
- Photos
- .STL files

We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials:
digital file

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more