Scathach's Lances [3D Print Files]

Dangerous Ladies' 3D models for Scathach's lances
Model by Jennifer Rezny (@quicksparrows)

.stl format.

Pre-sliced for printing on a 20cmx20cmx20cm bed.

Model is set up to use a 3/4" PVC pipe. The blades use 1/4" dowels for alignment and strength. The dowels run the entire length of the blade so it should be very durable.

The decorative wrap on the pipe is not included as it is a nightmare to print and involves printing approximately 9 decorative sleeves for the PVC pipe (adding days worth of printing!), but if you would like them added, please message me and I can make arrangements.

Files include:
- Reference images
- LONG lance .stl files
- SHORT lance .stl files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file