Raya O Senna's Staff [3D Print Files]

Dangerous Ladies' 3D models for Raya O Senna's staff.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Cut for a 200mm or 300mm printer, ideally with a base around 200x200. Finishes at around 72" with the specified PVC handle, but you can shorten or lengthen it without scaling by changing the length of the pole.

This prop assembles on a 3/4" PVC pipe, cut 65" long. It goes quite a way into the head, so you could choose not to glue it in if you want the head removable for travel.

If you want to use a 1" wooden dowel instead, print at 96%. Remember that PVC is measured by inner diameter, not outer diameter; a 3/4" PVC pipe is about 27mm in diameter, and a 1" wooden dowel is about 26mm.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies