![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Nobara's Hammer and Nails [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/nobaras-hammer-and-nails-3d-print-files-989091.png?v=1707156221)
![Nobara's Hammer and Nails [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/nobaras-hammer-and-nails-3d-print-files-392351.png?v=1707156221)
![Nobara's Hammer and Nails [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/nobaras-hammer-and-nails-3d-print-files-298205.png?v=1707156221)
Dangerous Ladies' 3D models for Nobara's hammer and nails.
Model by Christine van Schaik (@horrificeseance)
.stl format. Sliced for printing on a 300mm printer. Finishes at 13.75".
Prints seamlessly and with minimal supports, as all the parts of the head slot together. I've also included a file for a nail in case you want a con-safe one or a lightweight one if you want to do a ton of them.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Nobara's Hammer and Nails [3D Print Files]
Dangerous Ladies' 3D models for Nobara's hammer and nails.
Model by Christine van Schaik (@horrificeseance)
.stl format. Sliced for printing on a 300mm printer. Finishes at 13.75".
Prints seamlessly and with minimal supports, as all the parts of the head slot together. I've also included a file for a nail in case you want a con-safe one or a lightweight one if you want to do a ton of them.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...