3D printed cosplay kits for Morrigan/Lilith's bat wings, both back and head. Also works brilliantly for any winged character you'd like to portray as it is very customizable! Printed in TPU to help provide a little bit of natural bounce to them. 

Back Wings: Finish with a wingspan of approx 60". The wing itself is just the frame; the inner parts have channels meant for fabric or foam. We do not provide a harness, nor the hardware (bolts, nuts, etc;.) for you within the kit, but it does come with 2 prongs upon which the wings slot into that would then attach to your harness for stability.

The wings can be made removable; you will probably want to do this for travel, and for more or less quick release. It's designed so you need only get a 3/8" carriage bolt (ideally 6-7" long) to slot it into the wing and harness at once, locking it in place. There is an optional "cap" piece you can put on top to hide the bolt, and the cap piece has a magnet slot on the bottom so you can put a magnet in to help hold to the top of the bolt. You can put a nut on the bottom of the bolt for extra security, but it's probably not necessary. To remove the wing, just push the bolt up from the bottom and remove from the slot, then pull the wing off. (See attached video.) If you want the bolt to be invisible while you wear it, you can use a shorter bolt, but you'll need to poke a pen or something up into the bottom hole to push it back out of place.

Head Wings: Finish with a wingspan of 22"  There is a slot in the base of the wing for a 1/4" dowel or screw so you can attach it to a headband worn under the wig, or to the wig itself with wire.

Ships unassembled and unfinished. Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!