![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Mew Pudding's Puring Ring Tambourines [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mew-puddings-puring-ring-tambourines-3d-print-files-573764.png?v=1707155890)
![Mew Pudding's Puring Ring Tambourines [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mew-puddings-puring-ring-tambourines-3d-print-files-369162.png?v=1707155890)
![Mew Pudding's Puring Ring Tambourines [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/mew-puddings-puring-ring-tambourines-3d-print-files-383645.png?v=1707155890)
Dangerous Ladies' 3D models for Mew Pudding's Tambourine Rings.
Models by Jennifer Rezny (@quicksparrows),
.stl format. Finishes around 9" across, and needs a printer with a 200x200mm footprint, but many pieces will fit smaller.
The two halves of the tambourine have slots for 12mm posts (1/4") that the jingles slot onto. You can cut these posts from 1/4" dowels or you can use the print files, but dowel will be a little stronger. If you're feeling fun, you can buy real tambourine jingles and slot them on instead of printing them. Best way to annoy your fellow con-goers, right? >:)
There are two versions of the inner ring, one with a ring you can attach a real bell to, and one with a post (also a 1/4" dowel or printed piece) for a fake bell.
Files include:
- Photos
- .STL files
We printed ours at 0.1 mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Models by Jennifer Rezny (@quicksparrows),
.stl format. Finishes around 9" across, and needs a printer with a 200x200mm footprint, but many pieces will fit smaller.
The two halves of the tambourine have slots for 12mm posts (1/4") that the jingles slot onto. You can cut these posts from 1/4" dowels or you can use the print files, but dowel will be a little stronger. If you're feeling fun, you can buy real tambourine jingles and slot them on instead of printing them. Best way to annoy your fellow con-goers, right? >:)
There are two versions of the inner ring, one with a ring you can attach a real bell to, and one with a post (also a 1/4" dowel or printed piece) for a fake bell.
Files include:
- Photos
- .STL files
We printed ours at 0.1 mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Mew Pudding's Puring Ring Tambourines [3D Print Files]
SKU: 1025
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Mew Pudding's Tambourine Rings.
Models by Jennifer Rezny (@quicksparrows),
.stl format. Finishes around 9" across, and needs a printer with a 200x200mm footprint, but many pieces will fit smaller.
The two halves of the tambourine have slots for 12mm posts (1/4") that the jingles slot onto. You can cut these posts from 1/4" dowels or you can use the print files, but dowel will be a little stronger. If you're feeling fun, you can buy real tambourine jingles and slot them on instead of printing them. Best way to annoy your fellow con-goers, right? >:)
There are two versions of the inner ring, one with a ring you can attach a real bell to, and one with a post (also a 1/4" dowel or printed piece) for a fake bell.
Files include:
- Photos
- .STL files
We printed ours at 0.1 mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Models by Jennifer Rezny (@quicksparrows),
.stl format. Finishes around 9" across, and needs a printer with a 200x200mm footprint, but many pieces will fit smaller.
The two halves of the tambourine have slots for 12mm posts (1/4") that the jingles slot onto. You can cut these posts from 1/4" dowels or you can use the print files, but dowel will be a little stronger. If you're feeling fun, you can buy real tambourine jingles and slot them on instead of printing them. Best way to annoy your fellow con-goers, right? >:)
There are two versions of the inner ring, one with a ring you can attach a real bell to, and one with a post (also a 1/4" dowel or printed piece) for a fake bell.
Files include:
- Photos
- .STL files
We printed ours at 0.1 mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...