![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Malenia's Arm Armour [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/malenias-arm-armour-3d-print-files-215451.png?v=1707155674)
![Malenia's Arm Armour [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/malenias-arm-armour-3d-print-files-595219.png?v=1707155674)
![Malenia's Arm Armour [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/malenias-arm-armour-3d-print-files-735084.png?v=1707155674)
![Malenia's Arm Armour [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/malenias-arm-armour-3d-print-files-784681.png?v=1707155674)
Dangerous Ladies' 3D models for Malenia's arm armour.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Arm armour in one size. Prepared for a print bed 200x200x300, but many pieces will fit shorter/smaller printers at an angle.
There are two versions of the lower arm armour; one has a blade holder, one does not. The blade holder version has a line of magnet slots in case you want to attach your own foam/etc blade.
By default, the arm is sized for the following measurements:
- 18" from armpit to wrist
- 12.5" circumference of arm at underarm
- 9.75" circumference at elbow
- 7" circumference of wrist
- 8" shoulder depth
Because the measurements vary, you can scale up and down, or just side to side, as desired, to get the size you want. Please do size tests before printing your high-quality prints.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Arm armour in one size. Prepared for a print bed 200x200x300, but many pieces will fit shorter/smaller printers at an angle.
There are two versions of the lower arm armour; one has a blade holder, one does not. The blade holder version has a line of magnet slots in case you want to attach your own foam/etc blade.
By default, the arm is sized for the following measurements:
- 18" from armpit to wrist
- 12.5" circumference of arm at underarm
- 9.75" circumference at elbow
- 7" circumference of wrist
- 8" shoulder depth
Because the measurements vary, you can scale up and down, or just side to side, as desired, to get the size you want. Please do size tests before printing your high-quality prints.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Malenia's Arm Armour [3D Print Files]
SKU: 1021
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Malenia's arm armour.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Arm armour in one size. Prepared for a print bed 200x200x300, but many pieces will fit shorter/smaller printers at an angle.
There are two versions of the lower arm armour; one has a blade holder, one does not. The blade holder version has a line of magnet slots in case you want to attach your own foam/etc blade.
By default, the arm is sized for the following measurements:
- 18" from armpit to wrist
- 12.5" circumference of arm at underarm
- 9.75" circumference at elbow
- 7" circumference of wrist
- 8" shoulder depth
Because the measurements vary, you can scale up and down, or just side to side, as desired, to get the size you want. Please do size tests before printing your high-quality prints.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Arm armour in one size. Prepared for a print bed 200x200x300, but many pieces will fit shorter/smaller printers at an angle.
There are two versions of the lower arm armour; one has a blade holder, one does not. The blade holder version has a line of magnet slots in case you want to attach your own foam/etc blade.
By default, the arm is sized for the following measurements:
- 18" from armpit to wrist
- 12.5" circumference of arm at underarm
- 9.75" circumference at elbow
- 7" circumference of wrist
- 8" shoulder depth
Because the measurements vary, you can scale up and down, or just side to side, as desired, to get the size you want. Please do size tests before printing your high-quality prints.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...