![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Chidori's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chidoris-accessories-3d-print-files-316293.png?v=1709134823)
![Chidori's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chidoris-accessories-3d-print-files-982498.png?v=1709134823)
![Chidori's Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/chidoris-accessories-3d-print-files-877312.png?v=1709134823)
Dangerous Ladies' 3D models for Chidori's accessories, version 2!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm tall bed, but many pieces will fit smaller.
The blade pieces for the headband have slots in them so you can slot them onto the headband. The anklet has a 13" circumference by default for that oversized look, but you can pad out with foam to keep it up on your ankle. There is a halved version too that has slots for 1/4" magnets to pop them on and off. The spikes print separately, but honestly, I'd just skip them and cut segments of 1/4" dowel instead; they'll be MUCH stronger than printed spikes!
The axe is approximately 40cm long. Try printing out the handle first to see if you like the size.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm tall bed, but many pieces will fit smaller.
The blade pieces for the headband have slots in them so you can slot them onto the headband. The anklet has a 13" circumference by default for that oversized look, but you can pad out with foam to keep it up on your ankle. There is a halved version too that has slots for 1/4" magnets to pop them on and off. The spikes print separately, but honestly, I'd just skip them and cut segments of 1/4" dowel instead; they'll be MUCH stronger than printed spikes!
The axe is approximately 40cm long. Try printing out the handle first to see if you like the size.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Chidori's Accessories [3D Print Files]
SKU: 671
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Chidori's accessories, version 2!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm tall bed, but many pieces will fit smaller.
The blade pieces for the headband have slots in them so you can slot them onto the headband. The anklet has a 13" circumference by default for that oversized look, but you can pad out with foam to keep it up on your ankle. There is a halved version too that has slots for 1/4" magnets to pop them on and off. The spikes print separately, but honestly, I'd just skip them and cut segments of 1/4" dowel instead; they'll be MUCH stronger than printed spikes!
The axe is approximately 40cm long. Try printing out the handle first to see if you like the size.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200mm tall bed, but many pieces will fit smaller.
The blade pieces for the headband have slots in them so you can slot them onto the headband. The anklet has a 13" circumference by default for that oversized look, but you can pad out with foam to keep it up on your ankle. There is a halved version too that has slots for 1/4" magnets to pop them on and off. The spikes print separately, but honestly, I'd just skip them and cut segments of 1/4" dowel instead; they'll be MUCH stronger than printed spikes!
The axe is approximately 40cm long. Try printing out the handle first to see if you like the size.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...