Link's Kokiri Shield [3D Print Files]

Dangerous Ladies' 3D models for Link's Deku Shield.
Model by Jennifer Rezny (@quicksparrows)

.stl format. This is a big boy! Includes slots for 10mm chicago screws (so you can screw fabric/webbing/leather straps on) The shield is roughly 20" from top to bottom and needs a 350x350mm footprint bed to print. However, it's very easily scaled down for smaller without having to recut it; dropping it down to 85% (17") will fit on a 300x300mm printer, or 70% (14%) for a 250mmx200mm printer.

Includes both a textured and plain version.

Files include:
- Photos
- .STL files

We printed ours at 0.2 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies