Description
A 3D Printed Kit for Laios' sword, Kensuke! Finishes at 40" long.
Both use a PVC pipe for the handle and include an end cap for the bottom.
- The 36" version uses a 3/4" PVC pipe cut 29" long.
- The 44" version uses a 3/4" PVC pipe cut 36" long.
The little eye doodles are separate and slot in, so you can remove them for storage/travel. As they are quite spindly, I suggest not gluing them in permanently so if they break you can replace them!
Ships unfinished and may require sanding, filling, and painting. Glue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order!
Feel free to tag us to show us what you print and make! We love to see finished works.
Description
A 3D Printed Kit for Laios' sword, Kensuke! Finishes at 40" long.
Both use a PVC pipe for the handle and include an end cap for the bottom.
- The 36" version uses a 3/4" PVC pipe cut 29" long.
- The 44" version uses a 3/4" PVC pipe cut 36" long.
The little eye doodles are separate and slot in, so you can remove them for storage/travel. As they are quite spindly, I suggest not gluing them in permanently so if they break you can replace them!
Ships unfinished and may require sanding, filling, and painting. Glue, paints and tools not included. Please allow 1-2 weeks for production, as everything is made to order!
Feel free to tag us to show us what you print and make! We love to see finished works.
Reviews
Finishing Guides
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.