Dangerous Ladies' 3D model for Lady Seiros' Sword
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a a 150mm, 200mm or 300mm bed.

The sword finishes around 42". It requires a 39.25" long dowel (1/4" diameter) for the inside; we suggest aluminum because it is stronger while also being lightweight, but steel and wood work just fine too.

The crossguard has a whole version and a split version; the split version uses pegs to connect back together. You must print both sides; if you try to mirror one, the curved hand guard piece will not connect properly. I have included a file for the pegs for the crossguard but you can just cut two 1cm long pieces of 1/8" dowel if you'd like -- or use a couple toothpicks!

Files include:
- Reference images
- .stl files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file