![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Juri Arisugawa's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/juri-arisugawas-sword-3d-print-files-716589.jpg?v=1707155717)
![Juri Arisugawa's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/juri-arisugawas-sword-3d-print-files-111982.jpg?v=1707155718)
![Juri Arisugawa's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/juri-arisugawas-sword-3d-print-files-253582.jpg?v=1707155718)
Dangerous Ladies' 3D models for Juri's Sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" long, with a 36" blade. Prints on a printer 235mm or taller, but many pieces will fit smaller.
Assembles on a 42.5" long dowel or aluminum rod, 1/4" diameter. There are also a few slots for 3mm magnets in the blade/crossguard if you want the blade to come apart for travel –– just make sure you cut the internal dowel in two with a bit of a stagger. (Leave some extra coming out of the crossguard to slot into the blade!)
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Juri Arisugawa's Sword [3D Print Files]
Dangerous Ladies' 3D models for Juri's Sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Finishes at 45" long, with a 36" blade. Prints on a printer 235mm or taller, but many pieces will fit smaller.
Assembles on a 42.5" long dowel or aluminum rod, 1/4" diameter. There are also a few slots for 3mm magnets in the blade/crossguard if you want the blade to come apart for travel –– just make sure you cut the internal dowel in two with a bit of a stagger. (Leave some extra coming out of the crossguard to slot into the blade!)
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...