Dangerous Ladies' 3D models for Infinite's Mask
Models by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Should fit a head 7" wide, but we suggest test printing with junk settings before printing your good one!
Assembles on the following hardware:
- 4x 1/4" dowel pins, cut 1" long.
There are optional smaller holes that can't quite fit a printed key, but we've put tiny slots that fit little strips of 1.75mm filament in case you want extra alignment help.
We suggest joining both top halves together, and then joining the top to the bottom.
The jaw is a little short; that's just the character design! If you have a larger jaw, you may prefer to trim away a little bit around the front of the "neck" for added comfort.
Files include:
- Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Dangerous Ladies' 3D models for Infinite's Mask
Models by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Should fit a head 7" wide, but we suggest test printing with junk settings before printing your good one!
Assembles on the following hardware:
- 4x 1/4" dowel pins, cut 1" long.
There are optional smaller holes that can't quite fit a printed key, but we've put tiny slots that fit little strips of 1.75mm filament in case you want extra alignment help.
We suggest joining both top halves together, and then joining the top to the bottom.
The jaw is a little short; that's just the character design! If you have a larger jaw, you may prefer to trim away a little bit around the front of the "neck" for added comfort.
Files include:
- Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Reviews
Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...