Description
A 3D printed cosplay kit for Infinite's Mask from Sonic Forces. Modeled by Cole Nielsen (@_craftcentric).
Should fit a head 7" wide, but we suggest test printing with junk settings before printing your good one!
Assembles on the following hardware:
- 4x 1/4" dowel pins, cut 1" long.
The jaw is a little short; that's just the character design! If you have a larger jaw, you may prefer to trim away a little bit around the front of the "neck" for added comfort.
Glue, paints and tools not included. Ships unfinished and may require sanding, filling, and painting. See our FAQ page for details. All kits are made to order and may take 2-3 weeks to produce.
Infinite's Mask - Sonic Forces
Payment Plans Available on Orders over $100!
Contact us to learn more.
Description
A 3D printed cosplay kit for Infinite's Mask from Sonic Forces. Modeled by Cole Nielsen (@_craftcentric).
Should fit a head 7" wide, but we suggest test printing with junk settings before printing your good one!
Assembles on the following hardware:
- 4x 1/4" dowel pins, cut 1" long.
The jaw is a little short; that's just the character design! If you have a larger jaw, you may prefer to trim away a little bit around the front of the "neck" for added comfort.
Glue, paints and tools not included. Ships unfinished and may require sanding, filling, and painting. See our FAQ page for details. All kits are made to order and may take 2-3 weeks to produce.
Reviews
Finishing Guides
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.