Dangerous Ladies' 3D models for Myrtenaster.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a 20cmx20cmx20cm bed. Finishes at 40.5" long.

This is designed to assemble into one piece, but there is the hinge part if you want to make it bend open to access the "bullets."

To assemble in one piece:
- 1x 38.75" dowel, 1/4"
- 8x 1" dowel/brass pin, 1/8"

To make it so it pivots open:
- 8x 1" dowel/brass pin, 1/8"
- 2x magnets, 19mm x 2mm disc
- 1x 8" dowel, 1/4" (for handle)
- 1x 30.5" dowel, 1/4" (for blade)
- screw with a 1/8" shaft, 5/8" length (for hinge)


Files include:
- Photos
- .STL files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies