Description
A 3D Printed Kit for Hunter's Path. Finishes at 48" from end to end. Ships unfinished and unassembled!
The bow is divided into sections: bottom, middle and top. You will need to assemble these sections together first before assembling them to each other. If you need to travel with it and collapse it, you don't need to glue the bottom segment to the middle; it'll drop the bow down to about 30" at the longest point.
The feather bits "float" using 1/8" acrylic rods, cut about 2" long. We will include these rods with your shipment!
This one is a bit of a doozy to assemble, so make sure you follow the layout diagram provided!
Description
A 3D Printed Kit for Hunter's Path. Finishes at 48" from end to end. Ships unfinished and unassembled!
The bow is divided into sections: bottom, middle and top. You will need to assemble these sections together first before assembling them to each other. If you need to travel with it and collapse it, you don't need to glue the bottom segment to the middle; it'll drop the bow down to about 30" at the longest point.
The feather bits "float" using 1/8" acrylic rods, cut about 2" long. We will include these rods with your shipment!
This one is a bit of a doozy to assemble, so make sure you follow the layout diagram provided!
Reviews
Finishing Guides
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.