Dangerous Ladies' 3D models for Gale's buckles.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Good for both FDM and resin printing, but I suggest fine settings for the latter. Comes in three sizes -- 0.75", 1" and 1.25". Naturally, you can scale them to whatever size you want.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for Gale's buckles.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Good for both FDM and resin printing, but I suggest fine settings for the latter. Comes in three sizes -- 0.75", 1" and 1.25". Naturally, you can scale them to whatever size you want.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...