Subscribe to our newsletter for 10% OFF!

Description

A 3D Printed Kit for Frieren's Staff. 

Photos feature a short staff length, but is ideally made to be longer!!

Finishes 60" from end to end, but you can change the length without scaling by changing the length of the PVC pipe handle.

Order gems only if you've printed the staff yourself and just want the gem insets!

This does have a very specific assembly to get that "floating" bit in the middle if you want to do all your seam bodyshopping BEFORE assembly; basically you should assemble the main wheel and the gem settings, leaving the posts out. Then attach the gem setting to the main wheel using the shortest post, and then thread the longer post through the bottom/neck of the main wheel, through the gem setting, and into the top. Then you can put the upper collet/neck on, locking it all in place.

Assembles using the following dowels/rods:
- 1x handle, 1" PVC pipe (outer diameter 33.4mm) cut 48" long (not included)
- 1x long post, 1/4" dowel, cut 9" long
- 1x short post, 1/4" dowel cut 1.5" long.

Cosplay by: Aurie Photo by: Heavenly Visuals

Looking for a sewing pattern for this costume? Our friends got you covered! Indigo Patterns - Frieren Cosplay Sewing Pattern

Feel free to tag us to show us what you print and make! We love to see finished works.

Sale

Frieren's Staff [3D Printed Kit]

SKU: 47706385514813
Regular price $135.00 $108.00Sale
Unit price
per 
Made to Order
Ships Worldwide

Payment Plans Available on Orders over $100!
Contact us to learn more.

pla plastic, resin

Shipped and Made Consciously. Read More.

Need help? Contact us

Description

A 3D Printed Kit for Frieren's Staff. 

Photos feature a short staff length, but is ideally made to be longer!!

Finishes 60" from end to end, but you can change the length without scaling by changing the length of the PVC pipe handle.

Order gems only if you've printed the staff yourself and just want the gem insets!

This does have a very specific assembly to get that "floating" bit in the middle if you want to do all your seam bodyshopping BEFORE assembly; basically you should assemble the main wheel and the gem settings, leaving the posts out. Then attach the gem setting to the main wheel using the shortest post, and then thread the longer post through the bottom/neck of the main wheel, through the gem setting, and into the top. Then you can put the upper collet/neck on, locking it all in place.

Assembles using the following dowels/rods:
- 1x handle, 1" PVC pipe (outer diameter 33.4mm) cut 48" long (not included)
- 1x long post, 1/4" dowel, cut 9" long
- 1x short post, 1/4" dowel cut 1.5" long.

Cosplay by: Aurie Photo by: Heavenly Visuals

Looking for a sewing pattern for this costume? Our friends got you covered! Indigo Patterns - Frieren Cosplay Sewing Pattern

Feel free to tag us to show us what you print and make! We love to see finished works.

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Finishing Guides

The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

By Jennifer Rezny

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more
Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

By Jennifer Rezny

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more