![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Falin's Staff [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/falins-staff-3d-print-files-164649.png?v=1707155159)
![Falin's Staff [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/falins-staff-3d-print-files-876451.png?v=1707155159)
![Falin's Staff [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/falins-staff-3d-print-files-869510.png?v=1707155159)
![Falin's Staff [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/falins-staff-3d-print-files-225709.png?v=1707155159)
Dangerous Ladies' 3D models for Falin's staff.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on basically any FDM printer, but the boundaries are roughly 150x150x150 for the largest piece.
Comes with two versions; one that finishes 36in and one that finishes 44in. Of course, the only real difference here is the size of the lantern and the pipe it goes on; you can change the length by changing the length of the handle, while leaving the lantern as is. With this in mind, I suggest printing the 44in one for a bigger prop that shows up better in photos; the lantern is about 6" wide at the top.
The lantern prints in parts so it's seamless, and there's space inside for a tap light or similar to light up. You can glue the neck and the base together or you can use the six provided 1/4" slots (12 magnets total) to have it come apart to access a light. The glass panels print separately as well, so you can print them flat in a clear filament, or you can print one and use it as a template to cut out some acrylic or plastic sheeting. You do you!
Both use a PVC pipe for the handle and include an end cap for the bottom.
The 36" version uses a 3/4" PVC pipe cut 29" long.
The 44" version uses a 3/4" PVC pipe cut 36" long.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on basically any FDM printer, but the boundaries are roughly 150x150x150 for the largest piece.
Comes with two versions; one that finishes 36in and one that finishes 44in. Of course, the only real difference here is the size of the lantern and the pipe it goes on; you can change the length by changing the length of the handle, while leaving the lantern as is. With this in mind, I suggest printing the 44in one for a bigger prop that shows up better in photos; the lantern is about 6" wide at the top.
The lantern prints in parts so it's seamless, and there's space inside for a tap light or similar to light up. You can glue the neck and the base together or you can use the six provided 1/4" slots (12 magnets total) to have it come apart to access a light. The glass panels print separately as well, so you can print them flat in a clear filament, or you can print one and use it as a template to cut out some acrylic or plastic sheeting. You do you!
Both use a PVC pipe for the handle and include an end cap for the bottom.
The 36" version uses a 3/4" PVC pipe cut 29" long.
The 44" version uses a 3/4" PVC pipe cut 36" long.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Falin's Staff [3D Print Files]
SKU: 1746
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Falin's staff.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on basically any FDM printer, but the boundaries are roughly 150x150x150 for the largest piece.
Comes with two versions; one that finishes 36in and one that finishes 44in. Of course, the only real difference here is the size of the lantern and the pipe it goes on; you can change the length by changing the length of the handle, while leaving the lantern as is. With this in mind, I suggest printing the 44in one for a bigger prop that shows up better in photos; the lantern is about 6" wide at the top.
The lantern prints in parts so it's seamless, and there's space inside for a tap light or similar to light up. You can glue the neck and the base together or you can use the six provided 1/4" slots (12 magnets total) to have it come apart to access a light. The glass panels print separately as well, so you can print them flat in a clear filament, or you can print one and use it as a template to cut out some acrylic or plastic sheeting. You do you!
Both use a PVC pipe for the handle and include an end cap for the bottom.
The 36" version uses a 3/4" PVC pipe cut 29" long.
The 44" version uses a 3/4" PVC pipe cut 36" long.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should fit on basically any FDM printer, but the boundaries are roughly 150x150x150 for the largest piece.
Comes with two versions; one that finishes 36in and one that finishes 44in. Of course, the only real difference here is the size of the lantern and the pipe it goes on; you can change the length by changing the length of the handle, while leaving the lantern as is. With this in mind, I suggest printing the 44in one for a bigger prop that shows up better in photos; the lantern is about 6" wide at the top.
The lantern prints in parts so it's seamless, and there's space inside for a tap light or similar to light up. You can glue the neck and the base together or you can use the six provided 1/4" slots (12 magnets total) to have it come apart to access a light. The glass panels print separately as well, so you can print them flat in a clear filament, or you can print one and use it as a template to cut out some acrylic or plastic sheeting. You do you!
Both use a PVC pipe for the handle and include an end cap for the bottom.
The 36" version uses a 3/4" PVC pipe cut 29" long.
The 44" version uses a 3/4" PVC pipe cut 36" long.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...