Description
A 3D Printed Kit for the Edenmorn White Mage Cane to finish up any great WOL cosplay!
Finishes at approximately 60" end to end and ships unassembled and unfinished.
The wreath has a slot to insert clear acrylic dowels to support the "floating" bloom. These dowels go in after assembling and painting, and also allow the centre bloom to be removed if you don't want to glue the acrylic rods permanently in place. These are 1/4" dowels.
The flowers print separately, making for easy painting and fewer seams to bodyshop, and the handle has slots for 3/8" hex couplers so you can use a 3/8" threaded rod to make it disassemble from the head, neck and pommel. It has keys you can use instead of the couplers if you don't want it to break down, or want to limit how many places it breaks down in.
Hardware required, (not included):
- 1x 48.25" threaded rod; you will need to put breaks in this to preference depending on where you want it to break up.
- 6x 3/8" hex couplers, 45mm (depending on number of breaks you'd like, this could be x2 or x4 instead).
- 2x 1/4" clear acrylic dowels for the floating bloom.
Feel free to tag us to show us what you print and make! We love to see finished works.
Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!
Description
A 3D Printed Kit for the Edenmorn White Mage Cane to finish up any great WOL cosplay!
Finishes at approximately 60" end to end and ships unassembled and unfinished.
The wreath has a slot to insert clear acrylic dowels to support the "floating" bloom. These dowels go in after assembling and painting, and also allow the centre bloom to be removed if you don't want to glue the acrylic rods permanently in place. These are 1/4" dowels.
The flowers print separately, making for easy painting and fewer seams to bodyshop, and the handle has slots for 3/8" hex couplers so you can use a 3/8" threaded rod to make it disassemble from the head, neck and pommel. It has keys you can use instead of the couplers if you don't want it to break down, or want to limit how many places it breaks down in.
Hardware required, (not included):
- 1x 48.25" threaded rod; you will need to put breaks in this to preference depending on where you want it to break up.
- 6x 3/8" hex couplers, 45mm (depending on number of breaks you'd like, this could be x2 or x4 instead).
- 2x 1/4" clear acrylic dowels for the floating bloom.
Feel free to tag us to show us what you print and make! We love to see finished works.
Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
Attaching Resin and 3D Prints to Cosplays
Learn how to attach resin and 3D printed pieces to your cosplays using Dangerous Ladies Cosplay Kits!
