Dimitri's Lance [3D Print Files]

Dangerous Ladies' 3D model for Dimitri's lance.
Model by Jennifer Rezny (@quicksparrows)

.stl format.

Lance is proportioned to finish at 80" long, but you can change the length of your handle to adjust shorter or longer. Pre-sliced for printing on a 20cmx20cmx20cm bed or a 30cmx20cmx20cm bed.

The lance uses internal dowels for alignment and strength. It calls for two 10.5" dowels with a 1/4" diameter. These can be omitted but we recommend them for durability.

The lance pieces are designed to thread onto a 3/4" PVC pipe, but you can use a 1" dowel too. To get the 80" finished length, your pipe/dowel should be 62".

Files include:
- Reference images
- 300mm printer files
- 200mm printer files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file