Dangerous Ladies' 3D models for Devola and Popola's Staff
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed. It has tabs for quick and easy assembly, and includes a whole model.
Requires two square 1/2" dowels for assembly. The one for the top part of the handle is 8.5", and the one for the bottom is 6.5".
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed. It has tabs for quick and easy assembly, and includes a whole model.
Requires two square 1/2" dowels for assembly. The one for the top part of the handle is 8.5", and the one for the bottom is 6.5".
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for Devola and Popola's Staff
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed. It has tabs for quick and easy assembly, and includes a whole model.
Requires two square 1/2" dowels for assembly. The one for the top part of the handle is 8.5", and the one for the bottom is 6.5".
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 250mm tall bed. It has tabs for quick and easy assembly, and includes a whole model.
Requires two square 1/2" dowels for assembly. The one for the top part of the handle is 8.5", and the one for the bottom is 6.5".
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Reviews
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...