![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Deedlit's Small Accessories and Pauldrons [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/deedlits-small-accessories-and-pauldrons-3d-print-files-544033.png?v=1707154868)
![Deedlit's Small Accessories and Pauldrons [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/deedlits-small-accessories-and-pauldrons-3d-print-files-224508.png?v=1707154868)
![Deedlit's Small Accessories and Pauldrons [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/deedlits-small-accessories-and-pauldrons-3d-print-files-417986.png?v=1707154868)
Dangerous Ladies' 3D models for Deedlit’s small accessories!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Small pieces should fit on any printer, shoulder pauldrons need a 200x200mm base, 320mm tall whole, or 200mm tall for halves.
The waist belt (baldric) pieces are designed for a 1.5” belt.
Gems print separately.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers with 1.2mm walls. 2mm walls would be great too.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Small pieces should fit on any printer, shoulder pauldrons need a 200x200mm base, 320mm tall whole, or 200mm tall for halves.
The waist belt (baldric) pieces are designed for a 1.5” belt.
Gems print separately.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers with 1.2mm walls. 2mm walls would be great too.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Deedlit's Small Accessories and Pauldrons [3D Print Files]
SKU: 994
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Deedlit’s small accessories!
Model by Jennifer Rezny (@quicksparrows)
.stl format. Small pieces should fit on any printer, shoulder pauldrons need a 200x200mm base, 320mm tall whole, or 200mm tall for halves.
The waist belt (baldric) pieces are designed for a 1.5” belt.
Gems print separately.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers with 1.2mm walls. 2mm walls would be great too.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Small pieces should fit on any printer, shoulder pauldrons need a 200x200mm base, 320mm tall whole, or 200mm tall for halves.
The waist belt (baldric) pieces are designed for a 1.5” belt.
Gems print separately.
Files include:
- Photos
- .STL files
We printed ours at 0.1 layers with 1.2mm walls. 2mm walls would be great too.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...