Dangerous Ladies' 3D models for Byleth and Rhea's Uliuli Shakers.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Files include a shaker, a top plate, a ring for the bottom, gem backings, and gems. Like a real uliuli, it's designed so you can shake it and it makes noise! You can fill it with beads or any small hard object. The top prints separately and installs on a post so that you can put feathers, fabric, felt, or anything you like in between.

The shaker is hollow; you can print it without supports to avoid having to pull the supports out of the inside, but if your printer is not great at overhangs, you may want to set supports to 90 degree overhangs only. The hole to pour beads into is in the ball on the end; it plugs up with the shaker ring. (And if you don't want it to make noise, don't put beads in.)

I have included counts for how many pieces you need to print for a full set of two shakers, but if you want, you can halve the gem backings and gems and do them single-sided instead of double sided!


Files include:
- Photos
- .STL files

We printed ours at 0.15 and 0.2mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Finished uliuli by Aelynn Cosplay (https://twitter.com/aelynn000/)

Materials: digital file