![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Haru's Axe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/harus-axe-3d-print-files-561934.jpg?v=1707155449)
![Haru's Axe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/harus-axe-3d-print-files-656689.jpg?v=1707155449)
![Haru's Axe [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/harus-axe-3d-print-files-897150.jpg?v=1707155449)
Dangerous Ladies' 3D models for Haru's Axe
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cm tall bed, but there is a version of the main axe head for larger (35cm wide) beds for those who wish to print in one piece.
Assembles on a 38" length of 1/2" dowel.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Haru's Axe [3D Print Files]
Dangerous Ladies' 3D models for Haru's Axe
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 20cm tall bed, but there is a version of the main axe head for larger (35cm wide) beds for those who wish to print in one piece.
Assembles on a 38" length of 1/2" dowel.
Files include:
- Photos
- .STL files
We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...