Dangerous Ladies' 3D models for Azeyma's fans
Modeled by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Fan blade finish at about 15".
This model contains 5 printable components:
-2 inner fan halves
-3 outer fan pieces
Pieces are numbered for ONE fan. Please double to print two.
Assembles on the following hardware:
- Short chunks of 1.75mm filament is used to join parts together for alignment, but you can use toothpick chunks as well.
Assembly tips:
- The outer fan blades are 3 pieces and should fit snugly before being glued together. Because the holes are small, a small drill bit may be necessary to clear support out of the alignment holes. The outer fan blades have 5 slots.
- The inner fan blades are similar, but with 3 slots.
Assembles on a bolt or dowel for the middle pivot.
Files include:
-Renders
-.STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Dangerous Ladies' 3D models for Azeyma's fans
Modeled by Cole Nielsen (@_craftcentric)
.stl format. Cut for a 256mm print bed. Fan blade finish at about 15".
This model contains 5 printable components:
-2 inner fan halves
-3 outer fan pieces
Pieces are numbered for ONE fan. Please double to print two.
Assembles on the following hardware:
- Short chunks of 1.75mm filament is used to join parts together for alignment, but you can use toothpick chunks as well.
Assembly tips:
- The outer fan blades are 3 pieces and should fit snugly before being glued together. Because the holes are small, a small drill bit may be necessary to clear support out of the alignment holes. The outer fan blades have 5 slots.
- The inner fan blades are similar, but with 3 slots.
Assembles on a bolt or dowel for the middle pivot.
Files include:
-Renders
-.STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://instagram.com/thedangerousladies
DANGEROUSLADIES.CA
Reviews
Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...