Dangerous Ladies' 3D models for Solstice Recollection
Model by Cole Nielsen (@_Craftcentric)
.stl format. Sliced for a 250 x 250 x 250 bed size. Finishes approximately 14.5" across. It can spin, too!
HARDWARE:
- 1/8" acrylic rod, cut 146mm long
- 1/4" acrylic rod, cut 130mm long x2
- 2 small screws (M3 or #6 wood screw, used in the card support ring)
PRINTABLE KEYS:
- Inner loops - 3 internal keys
- Inner ring - 3 rectangular slot keys
- Outer ring - 3 external coupling keys
SPECIAL FEATURES:
- If you'd like to resin cast gems instead of using the printing files, it needs 6x 1/2" domes and 4x 3/4" domes.
- The outer ring has 2 small holes to attach a ring of playing cards as depicted in the reference. The mounting piece for that ring of cards has 2 small holes to make it simple to attach a thin hoop (wire, cellophane, acetate) to support the ring of cards.
- If you'd like to add a handle or a stand to it, you can extend one of the 1/4" acrylic rods to be longer, so that it sticks out of the prop and gives you something to mount from.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
https://bsky.app/profile/dangerousladies.ca
http://instagram.com/thedangerousladies
Dangerous Ladies' 3D models for Solstice Recollection
Model by Cole Nielsen (@_Craftcentric)
.stl format. Sliced for a 250 x 250 x 250 bed size. Finishes approximately 14.5" across. It can spin, too!
HARDWARE:
- 1/8" acrylic rod, cut 146mm long
- 1/4" acrylic rod, cut 130mm long x2
- 2 small screws (M3 or #6 wood screw, used in the card support ring)
PRINTABLE KEYS:
- Inner loops - 3 internal keys
- Inner ring - 3 rectangular slot keys
- Outer ring - 3 external coupling keys
SPECIAL FEATURES:
- If you'd like to resin cast gems instead of using the printing files, it needs 6x 1/2" domes and 4x 3/4" domes.
- The outer ring has 2 small holes to attach a ring of playing cards as depicted in the reference. The mounting piece for that ring of cards has 2 small holes to make it simple to attach a thin hoop (wire, cellophane, acetate) to support the ring of cards.
- If you'd like to add a handle or a stand to it, you can extend one of the 1/4" acrylic rods to be longer, so that it sticks out of the prop and gives you something to mount from.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
DANGEROUSLADIES.CA
https://bsky.app/profile/dangerousladies.ca
http://instagram.com/thedangerousladies