Subscribe to our newsletter for 10% OFF!

Description

A kit for the Ashen Wolves' body chains. Available in mix-and-match sizes. A small clawed piece is 4.5", a medium 6", and a large 7.5". A large collar is about 8" wide, a small collar is about 6" wide.

We have included a list below of the parts needed for each character. It takes the same amount of time and effort to cast everything regardless of size, so we have averaged out the prices. Please assemble whatever pieces you want based on size -- but we've also included "full set" listings in case you just want to grab a full kit and add a note with what size you want everything to be.

HAPI
For Hapi, all of her clawed pieces are separate on her body. A small clawed piece is 4.5", a medium 6", and a large 7.5". Check those measurements on your chest and lower back and decide which size fits best. Hapi's bracelets have a 7.5" circumference, but because they come in two parts with slots for magnets, you don't need to worry about getting that over your hand. If you need a custom size, send us an email. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • 2x Hapi bracelets
  • 1x collar piece
  • 2x clawed piece
  • 2x double bead


CONSTANCE
For Constance, all of her clawed pieces are separate on her body. A small clawed piece is 4.5", a medium 6", and a large 7.5". Check those measurements on your chest, hip and upper back and decide which size fits best. We haven't done her big flat collar piece they attach to because it's hard to fit universally!

You should order:

  • 1x round bead
  • 4x clawed piece
  • 6x single bead


BALTHUS
For his chain, measure across your chest. A small chain would be about 10", a medium about 13", and a large about 18". You can add extra pieces if you want to make it longer but use a different size for the clawed pieces. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • x1 collar piece
  • x2 clawed piece
  • x2 single bead


YURI
Measure around your chest from the front of your shoulder to the back of the same shoulder -- as if your measuring tape was his chest chain. Numbers around 32" fit small, around 42" fit medium, and around 52" fit large. You can stretch these numbers out or shrink them by eliminating pieces, spacing them out more, wearing them a little higher/lower, etc. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • x1 collar piece
  • x1 Yuri chest piece
  • x6 clawed piece
  • x3 double bead
  • x3 round bead


Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!

Looking for a sewing pattern for this costume? Our friends got you covered!

 

Sale

Ashen Wolves Body Chain Kit

SKU: 44063327420733
Regular price $8.00 $6.80Sale
Unit price
per 
Made to Order
Ships Worldwide

Payment Plans Available on Orders over $100!
Contact us to learn more.

Shipped and Made Consciously. Read More.

Need help? Contact us

Description

A kit for the Ashen Wolves' body chains. Available in mix-and-match sizes. A small clawed piece is 4.5", a medium 6", and a large 7.5". A large collar is about 8" wide, a small collar is about 6" wide.

We have included a list below of the parts needed for each character. It takes the same amount of time and effort to cast everything regardless of size, so we have averaged out the prices. Please assemble whatever pieces you want based on size -- but we've also included "full set" listings in case you just want to grab a full kit and add a note with what size you want everything to be.

HAPI
For Hapi, all of her clawed pieces are separate on her body. A small clawed piece is 4.5", a medium 6", and a large 7.5". Check those measurements on your chest and lower back and decide which size fits best. Hapi's bracelets have a 7.5" circumference, but because they come in two parts with slots for magnets, you don't need to worry about getting that over your hand. If you need a custom size, send us an email. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • 2x Hapi bracelets
  • 1x collar piece
  • 2x clawed piece
  • 2x double bead


CONSTANCE
For Constance, all of her clawed pieces are separate on her body. A small clawed piece is 4.5", a medium 6", and a large 7.5". Check those measurements on your chest, hip and upper back and decide which size fits best. We haven't done her big flat collar piece they attach to because it's hard to fit universally!

You should order:

  • 1x round bead
  • 4x clawed piece
  • 6x single bead


BALTHUS
For his chain, measure across your chest. A small chain would be about 10", a medium about 13", and a large about 18". You can add extra pieces if you want to make it longer but use a different size for the clawed pieces. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • x1 collar piece
  • x2 clawed piece
  • x2 single bead


YURI
Measure around your chest from the front of your shoulder to the back of the same shoulder -- as if your measuring tape was his chest chain. Numbers around 32" fit small, around 42" fit medium, and around 52" fit large. You can stretch these numbers out or shrink them by eliminating pieces, spacing them out more, wearing them a little higher/lower, etc. A large collar is about 8" wide, a small collar is about 6" wide.

You should order:

  • x1 collar piece
  • x1 Yuri chest piece
  • x6 clawed piece
  • x3 double bead
  • x3 round bead


Glue, paints and tools not included. Please allow 2-3 weeks for production, as everything is made to order!

Looking for a sewing pattern for this costume? Our friends got you covered!

 

Reviews

Finishing Guides

The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

By Jennifer Rezny

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more
Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

By Jennifer Rezny

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more