Subscribe to our newsletter for 10% OFF!

Your cart

Your cart is empty

White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies

We can print this for you!

Dangerous Ladies' 3D models for the Aqua Simulacra bow.
Models by Jennifer Rezny (@quicksparrows)

.stl format. Sliced for printers both 200 and 300mm tall. Finishes at 55" at full scale.

Assembles entirely on printed pegs; it's too curved to fit internal dowels. However, there are a number of little slots for 1/4" clear acrylic rods so you can make the "floating" pieces "float" almost invisibly. They are as follows:

Pipe A: 182mm
Pipe B: 193mm
Hovering Butterfly: 40mm
Hovering Emblem: 40mm
String Bottom: 70mm
String Top: 45mm
(Or) Whole String: 1025mm

If you don't want to do these, you can just use wooden dowel or run string from hole to hole.

Also, the pipe sleeves may be annoying to print. If you are using acrylic rods, you may want to skip them and just paint parts of the rod blue.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials:
digital file

Aqua Simulacra Bow [3D Print Files]

SKU: 135
Regular price $20.00
Unit price
per 
Instant Download
Email Delivery

Shipped and Made Consciously. Read More

Need help? Contact us

Dangerous Ladies' 3D models for the Aqua Simulacra bow.
Models by Jennifer Rezny (@quicksparrows)

.stl format. Sliced for printers both 200 and 300mm tall. Finishes at 55" at full scale.

Assembles entirely on printed pegs; it's too curved to fit internal dowels. However, there are a number of little slots for 1/4" clear acrylic rods so you can make the "floating" pieces "float" almost invisibly. They are as follows:

Pipe A: 182mm
Pipe B: 193mm
Hovering Butterfly: 40mm
Hovering Emblem: 40mm
String Bottom: 70mm
String Top: 45mm
(Or) Whole String: 1025mm

If you don't want to do these, you can just use wooden dowel or run string from hole to hole.

Also, the pipe sleeves may be annoying to print. If you are using acrylic rods, you may want to skip them and just paint parts of the rod blue.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials:
digital file

Finishing Guides

Quick Finishing Guide - 3D Printed and Resin Kits - DangerousLadies

Quick Finishing Guide - 3D Printed and Resin Kits

Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.

Read more
The Basic Supplies for Bodyshopping 3D Prints - DangerousLadies

The Basic Supplies for Bodyshopping 3D Prints

This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...

Read more