![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Aerith's Bracelets and Armbands [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/aeriths-bracelets-and-armbands-3d-print-files-288120.jpg?v=1707154662)
![Aerith's Bracelets and Armbands [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/aeriths-bracelets-and-armbands-3d-print-files-753625.jpg?v=1707154662)
![Aerith's Bracelets and Armbands [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/aeriths-bracelets-and-armbands-3d-print-files-705802.jpg?v=1707154662)
![Aerith's Bracelets and Armbands [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/aeriths-bracelets-and-armbands-3d-print-files-274984.jpg?v=1707154662)
![Aerith's Bracelets and Armbands [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/aeriths-bracelets-and-armbands-3d-print-files-515098.jpg?v=1707154662)
Dangerous Ladies' 3D models for Aerith's Bracelets and Arm Cuffs.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed.
This kit has versions for the Classic bracelets and the CC/AC bracelets.
You can print them in halves to make them snap together, or you can print them in full to be slip-on bangles. The opening of the full bracelets is 7".
The half versions have two sides; a side with a peg and a side with a slot. If you print one of each they should snap together quite securely if your printer is fine tuned enough. If you print two of the slot, you can put magnets in the slot.
Files include:
- Photos
- .STL files
We printed ours at 0.1-0.15 layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed.
This kit has versions for the Classic bracelets and the CC/AC bracelets.
You can print them in halves to make them snap together, or you can print them in full to be slip-on bangles. The opening of the full bracelets is 7".
The half versions have two sides; a side with a peg and a side with a slot. If you print one of each they should snap together quite securely if your printer is fine tuned enough. If you print two of the slot, you can put magnets in the slot.
Files include:
- Photos
- .STL files
We printed ours at 0.1-0.15 layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Sale
Aerith's Bracelets and Armbands [3D Print Files]
SKU: 679
15% off
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Aerith's Bracelets and Arm Cuffs.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed.
This kit has versions for the Classic bracelets and the CC/AC bracelets.
You can print them in halves to make them snap together, or you can print them in full to be slip-on bangles. The opening of the full bracelets is 7".
The half versions have two sides; a side with a peg and a side with a slot. If you print one of each they should snap together quite securely if your printer is fine tuned enough. If you print two of the slot, you can put magnets in the slot.
Files include:
- Photos
- .STL files
We printed ours at 0.1-0.15 layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing pieces on a 20cmx20cmx20cm bed.
This kit has versions for the Classic bracelets and the CC/AC bracelets.
You can print them in halves to make them snap together, or you can print them in full to be slip-on bangles. The opening of the full bracelets is 7".
The half versions have two sides; a side with a peg and a side with a slot. If you print one of each they should snap together quite securely if your printer is fine tuned enough. If you print two of the slot, you can put magnets in the slot.
Files include:
- Photos
- .STL files
We printed ours at 0.1-0.15 layers.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...