![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Zelda's Echoes of Wisdom Tri Rod [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/zeldas-echoes-of-wisdom-tri-rod-3d-print-files-cosplay-678777.png?v=1718915560)
![Zelda's Echoes of Wisdom Tri Rod [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/zeldas-echoes-of-wisdom-tri-rod-3d-print-files-cosplay-940483.png?v=1718915560)
Dangerous Ladies' 3D models for Zelda's Tri Rod.
Model by Jennifer Rezny (@quicksparrows)
.stl format. This is a super simple rod with a couple different versions! You'll need a printer at least 250mm, but I've included a whole version for those who would like to cut their own, and scaled down versions are possible on shorter printers.
It includes two versions:
THE WAND VERSION, which is big and stylized like the game; it is proportionally accurate and thus pretty large, finishing at 40" or 30". I would strongly suggest this version if you intend to look more cartoony.
THE STAFF VERSION, which is proportionally different from the game but is more like a magical staff and more suited to human proportions. I think this is quite pretty if you intend to do something a bit more realistic. It finishes at 70" or 52" long.
Hardware:
Wand 40in: 1" dowel, cut 21.75" long
Wand 30in: 3/4" dowel, cut 16.25" long
Staff 70in: 1" dowel, cut 39" long
Staff 52: 3/4" dowel, cut 29.25" long
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Zelda's Echoes of Wisdom Tri Rod [3D Print Files]
Dangerous Ladies' 3D models for Zelda's Tri Rod.
Model by Jennifer Rezny (@quicksparrows)
.stl format. This is a super simple rod with a couple different versions! You'll need a printer at least 250mm, but I've included a whole version for those who would like to cut their own, and scaled down versions are possible on shorter printers.
It includes two versions:
THE WAND VERSION, which is big and stylized like the game; it is proportionally accurate and thus pretty large, finishing at 40" or 30". I would strongly suggest this version if you intend to look more cartoony.
THE STAFF VERSION, which is proportionally different from the game but is more like a magical staff and more suited to human proportions. I think this is quite pretty if you intend to do something a bit more realistic. It finishes at 70" or 52" long.
Hardware:
Wand 40in: 1" dowel, cut 21.75" long
Wand 30in: 3/4" dowel, cut 16.25" long
Staff 70in: 1" dowel, cut 39" long
Staff 52: 3/4" dowel, cut 29.25" long
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...