![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Avacyn's Moonsilver Spear [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/avacyns-moonsilver-spear-3d-print-files-880905.png?v=1707154923)
![Avacyn's Moonsilver Spear [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/avacyns-moonsilver-spear-3d-print-files-869667.png?v=1707154923)
![Avacyn's Moonsilver Spear [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/avacyns-moonsilver-spear-3d-print-files-807744.png?v=1707154923)
Dangerous Ladies' 3D model for Avacyn’s Spear.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Includes both whole and halved versions. Cut for printing on a 300mm tall printer. Finishes at 72”, the head being 18.5” of that.
Assembles on a 1” wooden dowel. If you want to use a 3/4” PVC pipe, please print everything at 102%. Dowel should be cut 55” long to reach the full size, but you can lengthen or shorten as desired.
Files include:
- Reference images
- .stl files
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Avacyn's Moonsilver Spear [3D Print Files]
Dangerous Ladies' 3D model for Avacyn’s Spear.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Includes both whole and halved versions. Cut for printing on a 300mm tall printer. Finishes at 72”, the head being 18.5” of that.
Assembles on a 1” wooden dowel. If you want to use a 3/4” PVC pipe, please print everything at 102%. Dowel should be cut 55” long to reach the full size, but you can lengthen or shorten as desired.
Files include:
- Reference images
- .stl files
We printed ours at 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...