![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Vira's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/viras-sword-3d-print-files-381703.jpg?v=1707161573)
![Vira's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/viras-sword-3d-print-files-588918.jpg?v=1707161573)
![Vira's Sword [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/viras-sword-3d-print-files-106945.jpg?v=1707161573)
Dangerous Ladies' 3D model for Vira’s sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Cut for a 200mm x 200mm x 200mm printer. Finishes at 38” long, and assembles on dowels.
Dowels needed:
35” of 1/2” dowel x1
25.75” of 1/4” dowel x2
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Cut for a 200mm x 200mm x 200mm printer. Finishes at 38” long, and assembles on dowels.
Dowels needed:
35” of 1/2” dowel x1
25.75” of 1/4” dowel x2
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Vira's Sword [3D Print Files]
SKU: 542
Instant Download
Email Delivery
Dangerous Ladies' 3D model for Vira’s sword.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Cut for a 200mm x 200mm x 200mm printer. Finishes at 38” long, and assembles on dowels.
Dowels needed:
35” of 1/2” dowel x1
25.75” of 1/4” dowel x2
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Cut for a 200mm x 200mm x 200mm printer. Finishes at 38” long, and assembles on dowels.
Dowels needed:
35” of 1/2” dowel x1
25.75” of 1/4” dowel x2
Files include:
- Reference images
- .stl files
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...