Dangerous Ladies' 3D models for Pyra's Accessories and Armour.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Should fit on just about any printer size, but I've included some whole versions for larger pieces for people with bigger printers. I've also kept a lot of the gold pieces (especially on the wrist and ankle pieces) separate from the fins so that if you want to make your own armour pieces in foam, you can still use the gold 3D printed parts on your foam build.

A lot of these pieces don't have proper "flat backs" so angle them upright to minimize support! I strongly suggest test printing some pieces for scale first so you can get the right size for you, but everything is pretty straightforward and easy to scale. The trickiest part to resize is the upper arm cuff; it should load in on its side, so rotate it 90 degree to be upright -- it'll still look like it's on an angle. If you resize it on the Y and X axis and leave the Z axis alone, you should be able to fit most arm sizes. Then once it's resized, you can put it flat on the bed –– if you try to scale it while flat, it'll change the dimensions of the top!

Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file