![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Piers' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/piers-accessories-3d-print-files-154637.jpg?v=1707155845)
![Piers' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/piers-accessories-3d-print-files-992437.jpg?v=1707155845)
![Piers' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/piers-accessories-3d-print-files-749089.jpg?v=1707155845)
![Piers' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/piers-accessories-3d-print-files-969147.jpg?v=1707155845)
![Piers' Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/piers-accessories-3d-print-files-143156.jpg?v=1707155845)
Dangerous Ladies' 3D models for Piers' Accessories.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should all fit on just about any printer.
The choker splits in half to get on/off and closes with eight 1/4" magnets, but you can use four if you want.
The bracelet is one piece and made with an 8" enough circumference to slip over the hand by default.
The belt is made in 10 segments with two holes running through them; you can string the segments together on a wire or cord so it's not a big rigid band. They fit a 36" circumference by default, but they're easily scaled up and down, or just remove or add segments from the 10 count.
The boot skulls have a 3" inner width for the back of your heel; try a test print before you print in full quality!
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should all fit on just about any printer.
The choker splits in half to get on/off and closes with eight 1/4" magnets, but you can use four if you want.
The bracelet is one piece and made with an 8" enough circumference to slip over the hand by default.
The belt is made in 10 segments with two holes running through them; you can string the segments together on a wire or cord so it's not a big rigid band. They fit a 36" circumference by default, but they're easily scaled up and down, or just remove or add segments from the 10 count.
The boot skulls have a 3" inner width for the back of your heel; try a test print before you print in full quality!
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Piers' Accessories [3D Print Files]
SKU: 350
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Piers' Accessories.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should all fit on just about any printer.
The choker splits in half to get on/off and closes with eight 1/4" magnets, but you can use four if you want.
The bracelet is one piece and made with an 8" enough circumference to slip over the hand by default.
The belt is made in 10 segments with two holes running through them; you can string the segments together on a wire or cord so it's not a big rigid band. They fit a 36" circumference by default, but they're easily scaled up and down, or just remove or add segments from the 10 count.
The boot skulls have a 3" inner width for the back of your heel; try a test print before you print in full quality!
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format. Should all fit on just about any printer.
The choker splits in half to get on/off and closes with eight 1/4" magnets, but you can use four if you want.
The bracelet is one piece and made with an 8" enough circumference to slip over the hand by default.
The belt is made in 10 segments with two holes running through them; you can string the segments together on a wire or cord so it's not a big rigid band. They fit a 36" circumference by default, but they're easily scaled up and down, or just remove or add segments from the 10 count.
The boot skulls have a 3" inner width for the back of your heel; try a test print before you print in full quality!
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...