![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-196748.jpg?v=1707155715)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-290799.jpg?v=1707155715)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-768122.jpg?v=1707155715)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-234690.jpg?v=1707155715)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-593949.jpg?v=1707155715)
![Makoto's Mask and Knuckle Dusters [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/makotos-mask-and-knuckle-dusters-3d-print-files-154030.jpg?v=1707155715)
Dangerous Ladies' 3D model for Miss President's starter knuckle dusters
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Files include:
- Reference images
- .stl files
You can print either a complete body or a split body (upper and lower) depending on what kind of print quality/orientation you prefer. Split body allows for printing with far less support material, but includes a seam to patch. It aligns with 1/4" dowel pegs.
You can also opt to skip printing the handle and instead use two 3/4" PVC pipe segments about 8.5" long. This saves on some printing and sanding. You could also use a 1" dowel, but it will be a slightly looser fit; this is ideal if you plan to wrap the handle.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Files include:
- Reference images
- .stl files
You can print either a complete body or a split body (upper and lower) depending on what kind of print quality/orientation you prefer. Split body allows for printing with far less support material, but includes a seam to patch. It aligns with 1/4" dowel pegs.
You can also opt to skip printing the handle and instead use two 3/4" PVC pipe segments about 8.5" long. This saves on some printing and sanding. You could also use a 1" dowel, but it will be a slightly looser fit; this is ideal if you plan to wrap the handle.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Makoto's Mask and Knuckle Dusters [3D Print Files]
SKU: 626
Instant Download
Email Delivery
Dangerous Ladies' 3D model for Miss President's starter knuckle dusters
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Files include:
- Reference images
- .stl files
You can print either a complete body or a split body (upper and lower) depending on what kind of print quality/orientation you prefer. Split body allows for printing with far less support material, but includes a seam to patch. It aligns with 1/4" dowel pegs.
You can also opt to skip printing the handle and instead use two 3/4" PVC pipe segments about 8.5" long. This saves on some printing and sanding. You could also use a 1" dowel, but it will be a slightly looser fit; this is ideal if you plan to wrap the handle.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Model by Jennifer Rezny (@quicksparrows)
.stl format.
Pre-sliced for printing on a 20cmx20cmx20cm bed.
Files include:
- Reference images
- .stl files
You can print either a complete body or a split body (upper and lower) depending on what kind of print quality/orientation you prefer. Split body allows for printing with far less support material, but includes a seam to patch. It aligns with 1/4" dowel pegs.
You can also opt to skip printing the handle and instead use two 3/4" PVC pipe segments about 8.5" long. This saves on some printing and sanding. You could also use a 1" dowel, but it will be a slightly looser fit; this is ideal if you plan to wrap the handle.
We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Materials: digital file
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...