![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Yukari's Reload Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yukaris-reload-bow-3d-print-files-724662.png?v=1709135800)
![Yukari's Reload Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yukaris-reload-bow-3d-print-files-618012.png?v=1709135800)
![Yukari's Reload Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yukaris-reload-bow-3d-print-files-282787.png?v=1709135800)
![Yukari's Reload Bow [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/yukaris-reload-bow-3d-print-files-479998.png?v=1709135800)
Dangerous Ladies' 3D models for Yukari's Reload Bow.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200x200mm bed, with everything printed laying down for strongest print, but I've included whole versions for people who would like to recut on their own. Finishes at 44".
The bow is quite thin and doesn't have room for internal dowels, so it's very important that you print with thick walls. We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.4-1.6mm, and do the keys flat/in the opposite direction of the bow arm.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200x200mm bed, with everything printed laying down for strongest print, but I've included whole versions for people who would like to recut on their own. Finishes at 44".
The bow is quite thin and doesn't have room for internal dowels, so it's very important that you print with thick walls. We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.4-1.6mm, and do the keys flat/in the opposite direction of the bow arm.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Yukari's Reload Bow [3D Print Files]
SKU: 1787
Instant Download
Email Delivery
Dangerous Ladies' 3D models for Yukari's Reload Bow.
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200x200mm bed, with everything printed laying down for strongest print, but I've included whole versions for people who would like to recut on their own. Finishes at 44".
The bow is quite thin and doesn't have room for internal dowels, so it's very important that you print with thick walls. We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.4-1.6mm, and do the keys flat/in the opposite direction of the bow arm.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Model by Jennifer Rezny (@quicksparrows)
.stl format. Pre-sliced for printing on a 200x200mm bed, with everything printed laying down for strongest print, but I've included whole versions for people who would like to recut on their own. Finishes at 44".
The bow is quite thin and doesn't have room for internal dowels, so it's very important that you print with thick walls. We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.4-1.6mm, and do the keys flat/in the opposite direction of the bow arm.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...