![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Yamato's Club and Hair Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/club-and-hair-accessories-3d-print-files-456056.jpg?v=1707154899)
![Yamato's Club and Hair Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/club-and-hair-accessories-3d-print-files-552108.jpg?v=1707154899)
![Yamato's Club and Hair Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/club-and-hair-accessories-3d-print-files-385476.jpg?v=1707154899)
![Yamato's Club and Hair Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/club-and-hair-accessories-3d-print-files-123723.jpg?v=1707154899)
![Yamato's Club and Hair Accessories [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/club-and-hair-accessories-3d-print-files-940923.jpg?v=1707154899)
Dangerous Ladies' 3D models for Yamato's Club and Accessories
Model by Jennifer Rezny (@quicksparrows)
.stl format. Club finishes at 60" and is cut for 400mm, 220mm and 200mm printers. They assemble on core dowels/rods; I've included both a 12mm Metric version and a 1/2" Imperial version. Both versions assemble on a 143cm or 56.25" rod.
The horns have a plain version and a version with a 10mm slot for a Chicago screw and three 1/2" magnet slots. The hairpiece has a whole and halved version with key and can be installed on a comb.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Yamato's Club and Hair Accessories [3D Print Files]
Dangerous Ladies' 3D models for Yamato's Club and Accessories
Model by Jennifer Rezny (@quicksparrows)
.stl format. Club finishes at 60" and is cut for 400mm, 220mm and 200mm printers. They assemble on core dowels/rods; I've included both a 12mm Metric version and a 1/2" Imperial version. Both versions assemble on a 143cm or 56.25" rod.
The horns have a plain version and a version with a 10mm slot for a Chicago screw and three 1/2" magnet slots. The hairpiece has a whole and halved version with key and can be installed on a comb.
Files include:
- Photos
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...