Dangerous Ladies' 3D models for the Brunhild's sword.
Model by Jennifer Rezny (@quicksparrows)

.stl format. Pre-sliced for printing on a bed that is roughly 220x220x250. Finishes at 48”.

Assembles on internal dowels for strength and support:
2x 33.5” of 3/8”
1x 42.75” of 5/8”

The purple fins around the blade print separately on a rail of their own. I’ve included diagrams for them and also marked each piece with a part number (don’t worry, it’s hidden from sight when assembled.) This should help assemble in the proper order without having to remember what part is what! This whole structure can slot into the blade so everything can be printed, painted and finished separately. You don’t have to glue it in permanently or even glue them to each other; theoretically they could all be removed for storage/travel/etc. However, this may need some troubleshooting –– while I’ve done a careful 0.2mm of tolerance on all sides, if your printer is wobbly or you oversand pieces, you might end up changing that tolerance. I can’t guarantee it’ll hold in place without glue!

Also, because they’re separate, you can print them upright so they’re doublesided and with minimal support.

Files include:
- Reference images
- stl files

We printed ours at 0.1 and 0.15mm layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1-1.2mm.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file