Dangerous Ladies' 3D models for Zagreus' Eternal Spear
Model by Jennifer Rezny (@quicksparrows)

.stl format. Sliced for a 300mm printer, but many pieces will fit much smaller. Keyed for easy assembly. Most of the handle parts print separately by colour for easy painting before assembly!

Finishes at 72" long; you can adjust the height by scaling pieces or by shortening or lengthening your handle. You can also make this disassemble; the bottom pieces go on a separate shorter dowel, and the head pops onto the neck.

I suggest printing the side leaves with very thick walls for durability, and maybe don't glue them into their slots permanently; they should fit tightly with friction alone. This way if they happen to break on those spindly little vines, you can pop what's left out and replace with a new one.

Uses the following hardware to assemble:
1.25” dowel - 29mm (For 72” lance)
1/2” dowel - 15"
1/4” clear acrylic - 3.75" (This is for the diamond in the middle to give a floating effect!)

Files include:
- Photos
- .STL files

We printed ours at 0.15 layers. We suggest keeping a moderate infill (no lower than 15%) and walls of about 1.2-1.4mm. If you are printing the hollow version, you may wish to just print it with solid walls/infill for strength.

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

Materials: digital file