Description
A 3D printed cosplay kit for Shinjiro's axe. Finishes at 72".
It's designed so the blades can pop off the handle on two 1" magnets each (8 magnets total!) You can also just glue them in place. The spike can pop off on a 1/2" magnet too (2 total). The head can also slot off the pipe. This is handy for travel and storage, as it can pack down small.
Assembles on a 1.25" wooden dowel for the handle, cut 60" long. If you want to use a PVC pipe, you can print at 106% scale to use a 1" PVC pipe (OD 34mm.)
If you want to wrap the handle in carbon fibre vinyl or similar, then scale up by 1% as well to make extra space.
Assembles on keys! No dowels required.
Ships unfinished and may require sanding, filling, and painting. See our FAQ page for details. All kits are made to order and may take 2-3 weeks to produce.
Description
A 3D printed cosplay kit for Shinjiro's axe. Finishes at 72".
It's designed so the blades can pop off the handle on two 1" magnets each (8 magnets total!) You can also just glue them in place. The spike can pop off on a 1/2" magnet too (2 total). The head can also slot off the pipe. This is handy for travel and storage, as it can pack down small.
Assembles on a 1.25" wooden dowel for the handle, cut 60" long. If you want to use a PVC pipe, you can print at 106% scale to use a 1" PVC pipe (OD 34mm.)
If you want to wrap the handle in carbon fibre vinyl or similar, then scale up by 1% as well to make extra space.
Assembles on keys! No dowels required.
Ships unfinished and may require sanding, filling, and painting. See our FAQ page for details. All kits are made to order and may take 2-3 weeks to produce.
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
Attaching Resin and 3D Prints to Cosplays
Learn how to attach resin and 3D printed pieces to your cosplays using Dangerous Ladies Cosplay Kits!
