![White Mage's Bunny's Crescent Staff [3D Printed Kit] 3D Printed Kit cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/products/white-mages-bunnys-crescent-staff-3d-printed-kit-246548.jpg?v=1707156253&width=320)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-590462.png?v=1719002056)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-487953.png?v=1719002056)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-433348.png?v=1719002056)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-721528.png?v=1719002056)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-817313.png?v=1719002056)
![Red Mage's Rapier of the Demon [3D Print Files] 3D Files cosplay DangerousLadies](http://dangerousladies.ca/cdn/shop/files/red-mages-rapier-of-the-demon-3d-print-files-cosplay-281812.png?v=1719002056)
Dangerous Ladies' 3D models for Rapier Of The Demon.
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 220x220x250mm printers. Prints to approx 53" long. Refer to assembly guide for more instructions. Print Hollow Rapier Blade with 100% Infill for best structural integrity!
Required hardware needed for build:
- 6x20mm Dowel Chunk [x4]
- 1/2"(10") Dowel [x1]
Choose to print Mid Section with Eye Slots for access inside!
Files include:
- Assembly Guide (Print Ready)
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
https://dangerousladies.ca/
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Red Mage's Rapier of the Demon [3D Print Files]
Dangerous Ladies' 3D models for Rapier Of The Demon.
Model by Bryan Navasero (@hwsystems)
.STL format. Split for 220x220x250mm printers. Prints to approx 53" long. Refer to assembly guide for more instructions. Print Hollow Rapier Blade with 100% Infill for best structural integrity!
Required hardware needed for build:
- 6x20mm Dowel Chunk [x4]
- 1/2"(10") Dowel [x1]
Choose to print Mid Section with Eye Slots for access inside!
Files include:
- Assembly Guide (Print Ready)
- Photo Renders
- .STL files
Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.
Feel free to tag us to show us what you print and make! We love to see finished works.
https://dangerousladies.ca/
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies
Finishing Guides
Quick Finishing Guide - 3D Printed and Resin Kits
Just purchased a kit? Thanks for supporting us! Don't know where to start in assembling your 3D Print or Resin kit? We've got you covered.
The Basic Supplies for Bodyshopping 3D Prints
This guide is a great follow-along if you've purchased any Dangerous Ladies 3D printed cosplay props. This article is on the basic supplies you'll need for sanding FDM prints, with no...